This engine will start out as the Box Stock project 212 and will utilize the stock dished piston with the head milled .070, then ported accordingly with the VM22 intake manifold matched. This engine will like premium 91-93 octane pump gas

It will have the following,

212 BSP engine

Billet 3.303 clone rod

Stock dished piston (unless flat top option is used for more compression

BSP diecast budget flywheel (yes we can change it up with billet if you like)

BSP4 camshaft w/compression release for recoil starting (this cam is in short supply so we may have to substitute it, please message on availability prior to purchase)

China VM22 and intake manifold

Stainless valves with automotive style locks and retainers

10.8 red stripe valve springs (shimmed .060)

.009 head gasket

1.3 ratio stamped rocker arms

Stock 25/27mm valve (unless the 28.5 mm option is used)

PLEASE allow up to 4 weeks ship time on these builds depending on work load, please contact me to check availability before purchasing

Dyno results may vary depending on test day/air quality/temp/humidity. The dyno sheet is shown more as an example of what you will see and rpm to expect then a end all be all test number